RoHS
- Restriction on Hazardous Substances
Many materials provided by Arlon have been tested for compliance with directive 2002/95/EC
of the European Parliament and of the Council of 27 January 2003
on the restriction of the use of certain hazardous substances in
electrical and electronic equipment.
Arlon's standard calendered part numbers are of the form (GG)(##)(C)(CO)(TTT). The second part of the number, designated by (##), is a two digit code that identifies the silicone rubber compound used to produce that calendered product. The fourth part, designated by (CO), is a one or two letter code that identifies the color of the silicone rubber compound used to produce that calendered product. The calendered product is in compliance with the RoHS Directive if its compound code and color are listed below.
Silicone Rubber Compound Identification
| Compound Number |
Compound / Color Code |
|
Compound Number |
Compound / Color Code |
510CR |
10 / R |
|
414CB |
14 / B |
414CR |
14 / R |
|
322C |
22 / R |
427CB |
27 / B |
|
427CR |
27 / R |
440CN |
40 / N |
|
451C |
51 / N |
301CR |
56 / R |
|
410CB |
57 / B |
410CG1 |
57 / GA |
|
410CR |
57 / R |
410CXA |
57 / XA |
|
310CB |
58 / B |
310CG |
58 / G |
|
310CG1 |
58 / GA |
310CR |
58 / R |
|
434CB |
60 / B |
434C |
60 / R |
|
434CW |
60 / W |
388C |
62 / R |
|
472C |
72 / W |
493C |
94 / C |
|
397CX |
97 / X |
499CA |
99 / A |
|
375CR |
75 / R |
The absence of an Arlon silicone compound from the table above does not indicate that it is not in compliance with the RoHS Directive, but that evaluation for compliance may not yet be complete.
Please download the note below for a complete explanation on compliance of Arlon's calendered and extruded silicone products.
Arlon Silicone Products compliance with RoHS
Documents are provided in Adobe Acrobat format 
Challenge Us!
Let Arlon be your company's silicone development department.
|
